Place eaves beams into place.
Clamp eaves beam and knock fixing cleats into place.
Any cleats that catch on frame welds or couplers should be removed and screwed through frame.
Any cleats that catch on frame welds or couplers should be removed and screwed through frame.
Any cleats that catch on frame welds or couplers should be removed and screwed through frame.
Any cleats that catch on frame welds or couplers should be removed and screwed through frame.
Place coupler over front fames to accept gable frame.
Lift gable frame into place.
Lift gable frame into place.
Lift gable frame into place.
Make sure it sits neatly into the coupler.
You may need to notch out the top of the frame to allow it to sit tight against eaves beam.
Clamp in place ready to fix frames together.
Clamp in place ready to fix frames together.
Clamp in place ready to fix frames together.
Drill and screw through bottom frame.
Drill and screw through bottom frame.
Put a support in place against the back wall to take the weight of the roof.
Lift ridge into place, onto rear support and front gable frame.
Lift ridge into place, onto rear support and front gable frame.
The rafters can now be dropped into place, first at the ridge.
Then at the eaves beam having put the stops into the supports to accept the bars.
Then at the eaves beam having put the stops into the supports to accept the bars.
Continue along ridge fixing the roof bars.
Continue along ridge fixing the roof bars.
Continue along ridge fixing the roof bars.
Continue along ridge fixing the roof bars.
Fix the front end bars onto the gable frame locking into the offset coupler.
Masonary drill for frame fixings.100, Screw bars to wall.
Push up remove tape to hold in place.
Continue along with sheets.
Make sure end caps are flush with bars.
All sheets are in now the caps can go on.
Work around the conservatory make sure sheet finish inline with bars.
Work around the conservatory make sure sheet finish inline with bars.
Work around the conservatory make sure sheet finish inline with bars.
Work around the conservatory make sure sheet finish inline with bars.
End bar against the wall has a rain baffle.
End bar against the wall has a rain baffle.
Drop the lead flashing into the rain baffle.
Drop the lead flashing into the rain baffle.
Knock end caps into place against lead.
Fix end caps badges into place.
Locate end bar closers in place.
Fix end badge into place.
Fix end caps to ridge cappings.
Fix end caps to ridge cappings.
Mastic caps into place to produce a water proof seal.
Mastic caps into place to produce a water proof seal.
Fit gutter brackets and roll gutter into place.
Fit gutter brackets and roll gutter into place.
Fit gutter brackets and roll gutter into place.
Offer ridge cresting into position.
Locate in place on a bars.
Offer front capping into place.
Drill and fix using white buttons provided.
Gable roof structure is complete.