Join couplers onto side frame to accept top “A” frames.
Join couplers onto side frame to accept top “A” frames.
Join couplers onto side frame to accept top “A” frames.
Place top frames into place.
Make sure it sits neatly into coupler.
Make sure it sits neatly into coupler.
Make sure it sits neatly into coupler.
Clamp both frames together.
Clamp both frames together.
Clamp both frames together.
Fix through using 60mm self drillers provided.
Fix through using 60mm self drillers provided.
Fix through using 60mm self drillers provided.
Fix through using 60mm self drillers provided.
Step aMasonry drill into wall.22
Offer wall plate into position.
Offer wall plate into position.
Wall plate is notched out to slot over frame,
Wall plate is notched out to slot over frame,
Wall plate is notched out to slot over frame,
Wall plate is notched out to slot over frame,
Once in place drill through grazing section.
Wall plate is notched out to slot over frame,
Wall plate is notched out to slot over frame,
Prepare front eaves beam, pull out all fixing cleats.
Offer front eaves beam into place.
Offer front eaves beam into place.
Clamp eaves beam into place, Ensure a good tight joint then the cleats can be knocked into place.
Clamp eaves beam into place, Ensure a good tight joint then the cleats can be knocked into place.
Eaves beam ready to accept bars.
Eaves beam ready to accept bars.
Fit offset coupler to accept bars on both ends. (These need to be cut to length.)
Drop end bars into couplers and clamp into place.
Once clamped screw through to source.
Once clamped screw through to source.
Once clamped screw through to source.
Once clamped screw through to source.
Once clamped screw through to source.
Once clamped screw through to source.
Drop central roof bars into place.
Drop central roof bars into place.
Then fix nut to the front and tighten with socket.
Then fix nut to the front and tighten with socket.
Then fix nut to the front and tighten with socket.
Repeat until the bars are connected.
Prepare roof sheets. Strip off protective cover and seal on sheet closers.
Prepare roof sheets. Strip off protective cover and seal on sheet closers.
Prepare roof sheets. Strip off protective cover and seal on sheet closers.
Prepare roof sheets. Strip off protective cover and seal on sheet closers.
Prepare roof sheets. Strip off protective cover and seal on sheet closers.
Offer sheets into place, push right into the wall plate.
Offer sheets into place, push right into the wall plate.
Offer sheets into place, push right into the wall plate.
Offer sheets into place, push right into the wall plate.
Offer sheets into place, push right into the wall plate.
Offer sheets into place, push right into the wall plate.